BKA Electrical recently attended an emergency electrical call-out on Queens Park Road, Brighton, after the customer’s kitchen electrics tripped and the circuit breaker would not reset. They found our number on Google and contacted us for help. Electrical testing traced the problem to a short-circuit fault on the kitchen ring circuit, between a wall socket and a socket on the kitchen island. We were able to isolate the faulty section safely, reconfigure the remaining wiring as two radial circuits and restore power to the kitchen.
Emergency Call-Out Project Overview
The customer reported that the kitchen electrics had tripped and the circuit breaker would not reset. Initial testing confirmed a short-circuit fault on the kitchen ring final circuit. Further fault finding narrowed the problem down to the section of cable between a wall socket and a socket serving the kitchen island.
Tracing the Short-Circuit Fault
Using a Megger electrical tester, we carried out fault-finding tests on the kitchen circuit to locate the cause of the tripping. The testing confirmed a short-circuit fault and allowed us to narrow the problem down to the cable section between a wall socket and the socket on the kitchen island. Short circuits are one of several reasons a circuit breaker can trip and refuse to reset. Our guide to why a fuse box keeps tripping explains some of the common causes and when professional fault finding may be needed.
Once the faulty section had been identified, we could isolate it from the rest of the circuit and plan a safe way to restore power without leaving the damaged section connected.
Making the Circuit Safe and Restoring Power
The faulty cable section was disconnected at both ends so it was no longer part of the live installation. Because the original circuit was a ring final circuit, we were then able to safely reconfigure the remaining wiring as two radial circuits. After carrying out the necessary testing, power was restored to the kitchen without reconnecting the damaged section.
Emergency Fault Resolved and Power Restored
Once the faulty cable section had been isolated and disconnected, the remaining parts of the circuit were tested and safely left operating as two radial circuits. This allowed the kitchen power to be restored without putting the damaged section of cable back into service.
The customer was left with the kitchen electrics working again and the fault safely dealt with. What initially presented as a breaker that would not reset was traced to a specific wiring fault, allowing the problem to be resolved without unnecessary disruption to the rest of the installation.
Need an Emergency Electrician in Brighton?
If you’re dealing with a tripping circuit breaker, loss of power or another urgent electrical fault in Brighton or Hove, BKA Electrical can carry out fault finding to identify the cause and make the installation safe. Find out more about our emergency electrician service in Brighton. For a different type of tripping fault, see our Albany Villas hob fault call-out in Hove, where the appliance itself was diagnosed as the cause. Contact us to arrange a call-out.